تقنيات يدوية من طين الخزف للمبتدئين

مرحبا بكم :
بالصور راح تشوفون طرق سهله ويدويه للمبتدئين وبدون استعمال الاله

not rush the process.(Spreading the clay)

(Flipping the clay)




(Rolling out the clay)




(Cutting your slabs)




(Let clay firm-up)




(Score or Scratch the edges)

بالصوره تشوفون انه يعمل خدوش






(Apply slip to edges)





المادة اللاصقه تعمل من طين زائد خل ( vinegar.)

(Applying the slip)




(Joining the pottery)



(When you have a good bond)

.


(Add a coil to the inside seam)


(Smoothing out the coil)



(The final touches - Corners)




The final touches - Top edge)




(Measuring for a top)


(Finishing touch - Handles)







(Roll coils)
Roll coils in a circular fashion.

(Make a pattern)
Line up coils rolls as seen here. Then place a couple coils on top above and below the coil rolls.

(Fill in gaps)
Press a ball of clay in each gap that you can see through.

(Scrape and Smooth)
Scrape all the coils together. Don't worry about the other side, your coil pattern will still be visible.

(Straighten edges)





[/COLOR][/SIZE]

(Lift carefully)
Carefully lift your coil slab.
(Make a bottom)
Cut out a shape for your bottom. I used a cup as a guide for my bottom.
(Bend and attach to the bottom)
Carefully bend the coil slab around the bottom you cut out.
(Smooth the bottom)
Flip over your piece then scrape and smooth the bottom. A finger that has been dipped in water works great for smoothing.
(Finishing touches)
On the area where the coil slab was put together use a pencil and draw the coil pattern back onto the piece. [SIZE=5][COLOR=sienna](Finishing touches - Smooth the top edge)
Smooth out the top and you piece is ready to dry slowly. It is important to dry the piece slowly because the grooves from the coils will crack if drying occurs too quickly.